Xantus 70-101 Acid Hunter is a direct inject acid and moisture neutralizer for 1.5 to 5 ton systems. It hunts down acid and moisture in the refrigerant circuit, neutralizes it and blends it into the oil, and guards against acid forming again: the protection a compressor needs after a burnout, a contaminated charge or a long-running leak. Inject through the low-side port in seconds, no pump-down. Made in the USA.
Specifications
| Manufacturer part number | 70-101 |
|---|
| Product line | Acid Hunter direct inject |
|---|
| System size | 1.5 to 5 ton |
|---|
| Charge | 5.3 grams |
|---|
| Function | Neutralizes acid and moisture, blends them into the oil, guards against acid formation |
|---|
| Application | Direct inject through the low-side service port; one-time use |
|---|
| Brand | Xantus Products, made in USA |
|---|
How to install
- Turn the system on and verify it is running.
- Attach the inject to the inject gun or manifold hose firmly, then to the low-side service port (generally the larger line).
- Purge the hose, open the low-side valve and watch the clear tube empty; close the valve as soon as it is clear. This only takes a few seconds.
- Verify the charge against the nameplate, cap the port, and run the system at least one hour so the product circulates.
Use it when
- Replacing a compressor after a burnout.
- An acid test kit shows acid in the oil.
- The system has run with a leak or moisture contamination and you want to protect the new charge.
Related Xantus products
Documents
Product bulletin, SDS and application videos from the manufacturer: xantusproducts.com/how-to-videos. See the full line on our Xantus Products brand page. Ships from Oozzio's Illinois warehouse; call 217-607-5850 with application questions.
