Amana ASZC180361

The Amana® brand ASZC18 heat pump uses the chlorine-free R-410A refrigerant and is part of our new ComfortNet™ family of communicating units. In addition, the ASZC18 contains the AC high efficiency Copeland® Scroll™ compressor, which provides improved temperature and humidity control. This unit is designed for the consumer who desires superb comfort and quiet operation. All Amana 18 SEER heat pumps must be installed with a bi-flow thermostatic expansion valve. This valve is installed in front of the indoor evaporator coil inline with the line set piping. This heat pump requires an indoor air handler or evaporator coil as part of a complete system. What tonnage coil or air handler should you use? it depends on two factors about the outside portion of the heat pump system: 1) the tonnage, and 2) the efficiency rating (listed as "SEER"). Usually, high efficiency heat pumps are required to use a larger tonnage evaporator coil than the tonnage of the outside heat pump. (for example, a 2 ton heat pump might be paired with a 3 ton or 3.5 ton evaporator coil.) to find the specific coils or air handlers that are recommended by Amana for this heat pump, please click on the accessories tab above. (also, you can view Amana's specifications sheets at the Documents tab above).

• AC Copeland® UltraTech™ scroll compressor
• High density foam compressor sound blanket
• ComfortNet™ communications system compatible
• Expanded ComfortAlert™ diagnostics built in
• Simple low voltage wiring to outdoor unit in communicating mode
• Diagnostic indicator lights and storage of six fault codes
• Color coded terminal strip for non-communicating setup
• SmartShift® technology with short cycle protection to ensure quiet, reliable defrost
• Factory installed bi-flow liquid line filter drier, suction line accumulator, compressor crankcase heater, high capacity muffler and coil and ambient temperature sensors
• Fully charged for 15 ft of tubing length
• Quiet ECM style condenser fan motor
• Sweat connection service valves with easy-access to gauge ports
• Amana® brand sound control top design
• Wire fan discharge grille
• Steel louver coil guard
• Baked on powder paint finish
• Rust resistant coated screws
• Compact footprint
• Top and side maintenance access
• 1-panel access to controls with space provided for field installed accessories

Standard/Approvals: AHRI Certified, ETL Listed

Application: Air Conditioning and Heating